Online courses for the ham radio license exams. The Ham Band - songs about ham radio!
 

General Class Exam Question Pool

effective 7/01/2007 thru 6/30/2011

Show:
    Unseen questions
    Weak questions
    Review questions
    Learned questions
    Incorrect answer choices  
   

G4D: Speech processors; S meters; common connectors

G4D01: What is the reason for using a properly adjusted speech processor with a single sideband phone transmitter?

It improves signal intelligibility at the receiver

It reduces average transmitter power requirements

It reduces unwanted noise pickup from the microphone

It improves voice-frequency fidelity



G4D02: Which of the following describes how a speech processor affects a transmitted single sideband signal?

It increases the average power

It increases the peak power

It reduces harmonic distortion

It reduces intermodulation distortion



G4D03: Which of the following can be the result of an incorrectly adjusted speech processor?

All of these answers are correct

Distorted speech

Splatter

Excessive background pickup



G4D04: What does an S-meter measure?

Received signal strength

Conductance

Impedance

Transmitter power output



G4D05: How does an S-meter reading of 20 db over S-9 compare to an S-9 signal, assuming a properly calibrated S meter?

It is 100 times stronger

It is 10 times weaker

It is 20 times weaker

It is 20 times stronger



G4D06: Where is an S-meter generally found?

In a receiver

In a SWR bridge

In a transmitter

In a conductance bridge



G4D07: Which of the following describes a Type-N connector?

A moisture resistant RF connector useful to 10 GHz

A small bayonet connector used for data circuits

A threaded connector used for hydraulic systems

An audio connector used in surround sound installations



G4D08: Which of the following connectors would be a good choice for a serial data port?

DB-9

PL-259

Type N

Type SMA



G4D09: Which of these connector types is commonly used for RF service at frequencies up to 150 MHz?

UHF

Octal

RJ-11

DB-25



G4D10: Which of these connector types is commonly used for audio signals in amateur radio stations?

RCA Phono

PL-259

BNC

Type N



G4D11: What is the main reason to use keyed connectors over non-keyed types?

Reduced chance of damage due to incorrect mating

Prevention of use by unauthorized persons

Higher current carrying capacity

All of these choices are correct





Color key:
● = Unseen
● = Weak
● = Review
● = Learned
● = Incorrect answer
Previous group:
G4C: Interference with consumer electronics; grounding
Back to index:
General Class Exam Question Pool
Next group:
G4E: HF mobile radio installations; emergency and battery powered operation
Home     What is ham radio?     Which exam?     Frequently Asked Questions (FAQ)     How to     Trouble with Practice Exams     Feedback     Prices     Refund policy     Terms and Conditions     Bumper sticker     Advertise with us     The Ham Band     Rate us     Question pools     Documents     facebook     Contact us     TestOnline     Links
A TestOnline website.  Copyright © 2001-2010, J. Cunningham & Assoc.  All rights reserved.