E1C: Station control: definitions and restrictions pertaining to local, automatic and remote control operation; control operator responsibilities for remote and automatically controlled stations
E1C01:
What is a remotely controlled station?
A station controlled indirectly through a control link
A station operated away from its regular home location
A station controlled by someone other than the licensee
A station operating under automatic control
E1C02:
What is meant by automatic control of a station?
The use of devices and procedures for control so that the control operator does not have to be present at a control point
A station operating with its output power controlled automatically
Remotely controlling a station’s antenna pattern through a directional control link
The use of a control link between a control point and a locally controlled station
E1C03:
How do the control operator responsibilities of a station under automatic control differ from one under local control?
Under automatic control the control operator is not required to be present at the control point
Under local control there is no control operator
Under automatic control there is no control operator
Under local control a control operator is not required to be present at a control point
E1C04:
When may an automatically controlled station retransmit third party communications?
Only when transmitting RTTY or data emissions
Never
When specifically agreed upon by the sending and receiving stations
When approved by the National Telecommunication and Information Administration
E1C05:
When may an automatically controlled station originate third party communications?
Never
Only when transmitting an RTTY or data emissions
When specifically agreed upon by the sending and receiving stations
When approved by the National Telecommunication and Information Administration
E1C06:
Which of the following statements concerning remotely controlled amateur stations is true?
A control operator must be present at the control point
Only Extra Class operators may be the control operator of a remote station
A control operator need not be present at the control point
Repeater and auxiliary stations may not be remotely controlled
E1C07:
What is meant by local control?
Direct manipulation of the transmitter by a control operator
Controlling a station through a local auxiliary link
Automatically manipulating local station controls
Controlling a repeater using a portable handheld transceiver
E1C08:
What is the maximum permissible duration of a remotely controlled station’s transmissions if its control link malfunctions?
3 minutes
30 seconds
5 minutes
10 minutes
E1C09:
Which of these frequencies are available for automatically controlled ground-station repeater operation?
29.500 - 29.700 MHz
18.110 - 18.168 MHz
24.940 - 24.990 MHz
10.100 - 10.150 MHz
E1C10:
What types of amateur stations may automatically retransmit the radio signals of other amateur stations?
Only auxiliary, repeater or space stations
Only beacon, repeater or space stations
Only earth stations, repeater stations or model crafts
Only auxiliary, beacon or space stations
|
Color key:
|
|
● = Unseen
|
|
● = Weak
|
|
● = Review
|
|
● = Learned
|
|
● = Incorrect answer
|
